Arrows move 1 mm (hold Shift for 1 cm). Drag the stripe to move it, a square handle to change its length, or the round handle to turn it (hold Shift to snap to 15°).
Highlighted in blue everywhere it repeats. Drag it on the photo to move it.
Ready to send
The zip holds the print file, a spec sheet (PDF), a 1:1 test print (PDF), your layout and a short read-me. Email or upload the zip to the printer.
Use a PDF pattern, or a clear image or scan of the pieces: dark outlines on a white page work best.
Choose a pattern to begin.
Scan your strips flat and side by side on a plain, light background, all running the same way. A flatbed scan at 200–600 dpi works best. PNG or JPEG.
Choose a scan to begin.
This tool turns the scanned bead strings into a print file for fabric. You arrange stripes on one square of fabric (the tile), and the printer repeats that square across the whole roll.
Tip: the All three tab shows every view at once, so you see each change everywhere.
Your work saves itself in this browser. Nothing you do here can damage the original scans.
The white rectangle is one repeat, shown at true size in centimetres (see the rulers). The faded copies around it show the neighbouring repeats.
A stripe pushed off one edge comes back on the opposite edge. That is what makes the print join up invisibly, so you can place stripes anywhere.
Change the tile's size and the repeat style in the Repeat panel on the right.
You can also drag a bead string thumbnail straight onto the tile. Press Esc to cancel.
Made a mistake? Ctrl+Z (Cmd+Z on a Mac) undoes it.
Shows the tile repeated as it will come off the printer. Straight lines the tiles up in a grid. Half-drop shifts every other column down by half a tile, which hides the grid.
Click the view to show or hide the tile outlines.
A preview of the print on a photo. It follows the folds and wraps round the body, so it is a good guide, not an exact fit.
Colourway recolours the strings while keeping each bead’s light and shade. Pick a preset or set each string’s colour yourself, then give the colourway a name. The name goes into the file names.
Versions save the whole layout, colours included. Save one, change things, save another, then press Compare side by side (or the Compare tab). Click a version there to open it. Undo takes you back.
The Fabric roll tab shows the repeat across the full fabric width, as the printer will print it. Set the width to match the jersey (ask the printer, often 140–160 cm).
The T-shirt pieces (front, back, two sleeves) sit on the roll. Drag them to choose where the print falls on each. Match back to front lines the back up so horizontal stripes meet at the side seams. The panel tells you whether they match.
Import a pattern… (Fabric roll panel or File menu) takes a PDF or an image of pattern pieces. It finds each piece on every page, ignores dashed seam-allowance lines, text and page grids, and opens out pieces drawn as halves to cut on the fold. Check the names, what each piece is (front, back, sleeve) and whether it is a half, and untick anything that is not a piece. Use ⟳ if a piece is lying sideways. Print-at-home PDFs (many A4 pages that tape together) are joined into one sheet first; if the pages land in the wrong places, change how many go “across”. One sleeve piece is treated as “cut 2”. If a piece is missed, press Trace a piece and click round it. A PDF is already true size; for an image, press Set scale and click two points you know the distance between.
The pieces land on the Fabric roll. Drag them to choose where the print is cut.
On a figure draws a front and back view from the pieces, so you see what each placement gives. On the photo, choose an item in Try on and set Cut … from to a piece: the photo then shows the print exactly where that piece sits on the roll.
The 3D tab sews the front, back and sleeves together and lets them hang on a mannequin, so the folds come from the cut itself. Drag to spin it; scroll or pinch to zoom.
It needs one piece marked Front and one marked Back; sleeves are optional. If seams are very different lengths it tells you. It is a guide to how the print falls, not a fitting tool.
Your own material: choose Import your own scan… (in New stripe, or the File menu). Scan strips flat on a plain light background, side by side. The tool finds each strip, cuts it out and makes it repeat seamlessly. Name them, untick any you don’t want, and add them. They then appear with the other strings.
Your own model: choose Open a model photo… in Try on. Then:
Snap to its edges (Try on panel) keeps an effect on the item itself even where the outline is rough, so skin or floor inside the outline is left alone. It is on for the shoes. Dark, shiny things like patent shoes keep their shine when you recolour them or put the print on them.
Your scans and photo stay in this browser. Save layout… packs them into the layout file, so you can send it to someone else.
Send to printer… is the quick way. It checks the file (joins, resolution, colours), tells you anything worth fixing, and saves one zip with everything the printer needs. The buttons below save each file on its own.
Simple / Everything (top of the side panels): Simple hides colourways, versions, the fabric roll and the colour settings. Switch to Everything to see them.
Before a full order, ask the printer for a test strip on the real fabric.
| Ctrl/Cmd+Z | Undo (add Shift to redo) |
| Arrow keys | Nudge the selected stripe 1 mm (Shift: 1 cm) |
| [ and ] | Turn it 1° (Shift: 15°) |
| R / F | Rotate 90° / flip |
| Ctrl/Cmd+D | Duplicate |
| Delete | Remove the selected stripe |
| Tab | Select the next stripe |
| Esc | Cancel placing, close a box, or deselect |